Janome MyLock 654D 

The NEW MyLock 654D overlocker has sailed in!  This 2/3/4 thread MyLock 654D overlocker from JANOME has joined the fleet - with HANENITE* vibration suppression, making it quiet and a pleasure to use.

• 8-PIECE FEED DOG 

• 2, 3 OR 4 THREADS FOR OVERLOCKING, FLAT LOCKING, AND ROLLED HEMMING 

• 1 OR 2 NEEDLES 

• COLOUR CODED THREAD GUIDES AND THREADING REFERENCE CHART INSIDE FRONT OPENING COVER 

• SLIDE-IN THREAD PRE-TENSION THREADING 

• PRESSER FOOT TENSION RELEASE 

• SEWING SPEED UP TO 1,300 S.P.M. (STITCHES PER MINUTE) 

• ADJUSTABLE STITCH LENGTH 1- 5MM. 3MM IS STANDARD 

• ADJUSTABLE CUTTING WIDTH (MM) USING LEFT NEEDLE 5,3 TO 7.3 

• NOT USING LEFT NEEDLE 3.1 TO 5.1 

• •DIFFERENTIAL FEED RATIO 0.5 TO 2.25 

• ADJUSTABLE FOOT PRESSURE AND SNAP-ON FEET 

• USES JANOME BALLPOINT HAX1SP NEEDLES 

• WIDE CHAINING FINGER. EASY CONVERSION TO ROLLED HEM, NO NEED TO CHANGE THE CHAINING FINGER 

• RETRACTABLE UPPER KNIFE WITH EASY PUSH RELEASE 

• FACE PLATE THREAD CUTTER 

• FOOT CONTROLLER 

• WASTE CHIP BOX INCLUDED 

• MOULDED CARRY HANDLE 

• METAL BASE COVER 

• MACHINE WEIGHT 7 KG 

  
  

  The 8-piece feed dog enables fabrics to glide under the foot. Refinements like the gentle curve at the tip of the presser foot helps for a smooth start. The clear visibility for the trimming the fabric is a plus for keeping on target, along with the differential feed system for improved operation when sewing over multiple layers of fabric (Bi-Level operation). And the easy change presser foot also has added texture on the underside to assist in fabric feeding and fabric slippage.

  ​

  An easy threading lower looper mechanism with colour coded threading chart is located inside the front sliding cover, this makes getting started and changing thread colours easy! 

  ​

  It’s fast and finishes like a dream. The powerful motor delivers consistent performance. Easy changeover to rolled hemming, the retractable upper knife release operation is a gentle push. The reduced pressure when lowering the knife to change settings e.g. to a rolled hem makes it easy. There is no changing needle plates or chaining fingers. The wide chaining finger helps give a smooth delivery of thread, even on bulky, stretchy and fine fabrics, resulting in less puckering. 

  ​

  The excellent needle visibility with white LED light helps for finishing seams and curves in no time. The MyLock 654D is a stable, smooth sailing overlocker with Hanenite feet for a quiet, low vibration operation, making it a pleasure to use. 

  The MyLock 654D is an investment in performance, this is an all-round overlocker to take customers through professionally finishing the vast array of modern fabrics. Suitable for all users from beginners where the colour coded threading guide is a must, to professionals looking for a reliable all-round overlocker to meet any finishing challenges.